DJ accessories

4-pin XLR LEDLamp with straight connector

Review: The LEDLamp is a variable brightness 18" gooseneck lamp for mixing console and other equipment illumination using LEDs (light emitting diodes) instead of a filament bulb. The LEDs are angled at 40 degrees ensuring a suitably wide light dispersion. Producing a bright, white light, the LEDLamp is more relaxing on the eye and better suited to illuminating a console control surface than the yellow light of a filament bulb. Unlike the filament bulb, the LEDs do not produce heat and they do not require replacement in time. A dimmer function is built into the lamp head. The light can be variably dimmed using a knurled thumbwheel from fully on to almost off so that it can be set according to the operating brightness required.

The LEDLamp circuit is built into a strong, stylish plastic moulding to ensure protection and user comfort. The flexible metal gooseneck can be bent into shape to adjust to the area being illuminated. It terminates in a 4-pin metal XLR suitable for plugging into the mating socket as found on many consoles including those made by Allen & Heath. Alternatively, it can be powered from an external 12V power supply.

LEDLamp is available in 2 versions, LEDLamp (right angled, designed for consoles with lamp socket on the rear panel) and LEDLamp-SX (straight, designed for consoles with lamp socket on the front panel).

CAT 5 VGA/Audio transmitter with 5 outputs

Review: A compact transmitter with an integral 4 x CAT 5 distribution amplifier which enables RGBHV and stereo audio signals to be distributed from HDTV multimedia or computer sources to VGA based monitors and projectors.

USB gooseneck fan

Review: Simply plug this USB gooseneck fan into any USB port on your notebook or PC to create a gentle refreshing breeze.

2-way stereo or 3-way mono active crossover

Review: The CX23 is a 2-way stereo or 3-way mono active crossover designed to split frequencies so that low frequencies are delivered to the amp driving the sub cabinets and mid/top frequencies are delivered to the AMP driving the mid/top frequency cabs. This type of system is more efficient and delivers more accurate sound quality, especially in larger PA systems.

Cord wrapper for earphones and cord

Review: Cassette tape shaped cord wrapper for your earphones, helping to avoid tangled wires. Fits one standard set of earphones and cord.

Cord wrapper for earphones and cord

Review: Vinyl record shaped cord wrapper for your earphones, helping to avoid tangled wires. Fits one standard set of earphones and cord.

Target light for the TT series turntables

Review: Replacement target light for the TT series turntables.

Stone Roses china mug with Made Of Stone single artwork

Carbon steel record disc stabilizer/turntable weight in grey powder paint finish

Review: Exclusive to Juno, here is the Mukatsuku Records branded solid carbon steel record weight/disc stabiliser/vinyl stabilizer/record clamp in grey powdered paint finish and much less than half the price of Audio Technica.exclusive to Juno fits all standard 7mm diameter turntable spindles

No springs, clips or screws required, just place the Mukatsuku disc stabilizer on the 12''/LP (or 7'' if it has a small hole)over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics/less distortion bringing the record into more intimate contact with the platter..

The Mukatsuku disc stabilizer is great for DJ use in a club environment or when recording from vinyl to digital. It may even possibly help dished records or skipping records. The weight keeps the record tight to the platter and is cut from 10mm carbon steel, and then coated in a grey plastic powder paint finish with a red felt underside. Weight is approx 360g.

Solid Kontrol case & stand designed for the X1, F1 or other controllers

Review: The Traktor Kontrol Stand gives you optimal placement of your Traktor Kontrol F1, X1 or other controllers for solid performance. Its extruded aluminium profile provides an extra-solid base and raises your Traktor Kontrol unit to industry-standard height, perfect for the Traktor Kontrol Z2 mixer. Molded rubber locating pins perfectly align the X1 or F1 and prevent sliding during performance.

TheTraktor Kontrol Stand is just as seential on the road as it is in the club, doubling as a case for your Traktor controller. The cover's unique constructin keeps your hardware's control panel protected during transport. Also included is a Natie Instruments microfiber bag so you don't have to sacrifice style for peace of mind from gig to gig.