DJ accessories

CAT 5 VGA/Audio transmitter with 5 outputs

Review: A compact transmitter with an integral 4 x CAT 5 distribution amplifier which enables RGBHV and stereo audio signals to be distributed from HDTV multimedia or computer sources to VGA based monitors and projectors.

USB gooseneck fan

Review: Simply plug this USB gooseneck fan into any USB port on your notebook or PC to create a gentle refreshing breeze.

2-way stereo or 3-way mono active crossover

Review: The CX23 is a 2-way stereo or 3-way mono active crossover designed to split frequencies so that low frequencies are delivered to the amp driving the sub cabinets and mid/top frequencies are delivered to the AMP driving the mid/top frequency cabs. This type of system is more efficient and delivers more accurate sound quality, especially in larger PA systems.

Cord wrapper for earphones and cord

Review: Cassette tape shaped cord wrapper for your earphones, helping to avoid tangled wires. Fits one standard set of earphones and cord.

Cord wrapper for earphones and cord

Review: Vinyl record shaped cord wrapper for your earphones, helping to avoid tangled wires. Fits one standard set of earphones and cord.

Target light for the TT series turntables

Review: Replacement target light for the TT series turntables.

Stone Roses china mug with Made Of Stone single artwork

Carbon steel record disc stabilizer/turntable weight in grey powder paint finish

Review: Exclusive to Juno, here is the Mukatsuku Records branded solid carbon steel record weight/disc stabiliser/vinyl stabilizer/record clamp in grey powdered paint finish and much less than half the price of Audio Technica.exclusive to Juno fits all standard 7mm diameter turntable spindles

No springs, clips or screws required, just place the Mukatsuku disc stabilizer on the 12''/LP (or 7'' if it has a small hole)over the spindle and hey presto, you can obtain tighter bass and sweeter treble, as well as improved dynamics/less distortion bringing the record into more intimate contact with the platter..

The Mukatsuku disc stabilizer is great for DJ use in a club environment or when recording from vinyl to digital. It may even possibly help dished records or skipping records. The weight keeps the record tight to the platter and is cut from 10mm carbon steel, and then coated in a grey plastic powder paint finish with a red felt underside. Weight is approx 360g.

Solid Kontrol case & stand designed for the X1, F1 or other controllers

Review: The Traktor Kontrol Stand gives you optimal placement of your Traktor Kontrol F1, X1 or other controllers for solid performance. Its extruded aluminium profile provides an extra-solid base and raises your Traktor Kontrol unit to industry-standard height, perfect for the Traktor Kontrol Z2 mixer. Molded rubber locating pins perfectly align the X1 or F1 and prevent sliding during performance.

TheTraktor Kontrol Stand is just as seential on the road as it is in the club, doubling as a case for your Traktor controller. The cover's unique constructin keeps your hardware's control panel protected during transport. Also included is a Natie Instruments microfiber bag so you don't have to sacrifice style for peace of mind from gig to gig.

Unisex watch

Review: Attention to detail and high quality materials are used throughout making the Mens Time Teller P Orange WatchA119-1211, a watch you can show off with glee.

Nixon The Time Teller P model in matte yellow, with a playful contemporary look. The dial features slender baton markers, and the watch fastens with a sturdy plastic/resin strap.

19'' rack mount kit for DJM-700

Review: The pioneer DJM 700 adapter is a 19" rack mount kit for the pioneer DJM700 4-channel performance mixer.

19" rack mount kit for DJM-800

Review: The Pioneer DJM 800 adapter is a 19" rack mount kit for the Pioneer DJM-800 4-channel performance mixer.

Standing bracket for all top plates

Review: This is the standing bracket & plate compatible with the Pioneer Top Plate2.

Complementing Pioneer's DJ decks and effectors, these solid plates and brackets incorporate a weighted balanced design with a durable powder-coated finish.

Product longevity and space within the DJ booth is maximised by the tailored fit each stand gives to its partnering product. Each plate features anti-vibration pads, six fixing holes with supplied screws as well as height and angle adjustment. Other design touches include cable management through the stem of the bracket and space for heat dissipation.

CDJ2000 top plate for the Pioneer Plate2 Standing Bracket

Review: This is the top plate compatible with the Pioneer ProDJ2000 Plate2 Standing Bracket.

Product longevity and space within the DJ booth is maximised by the tailored fit each stand gives to its partnering product.

Each plate features anti-vibration pads, six fixing holes with supplied screws as well as height and angle adjustment. Other design touches include cable management through the stem of the bracket and space for heat dissipation.

Wireless control for Smoke/Haze machines

Review: This wireless remote control is designed to control up to four QTX Light FX smoke/haze machines independently. 2 x LED indicators display whether the machine is ready for use or heating. (separate receivers for additional foggers are required).

Overlay skin adapted to the Traktor Pro 2, designed to fit the Digital Jockey & Jockey II

Review: The Digital Jockey 2 Overlay is suitable for all Digital Jockey generations which were specially adapted to the Traktor Pro 2. Made of resistant PP foil it can be easily placed on the Digital Jockey.

With the mapping available in the Reloop forum, you get full control of the Sample Decks in the Traktor Pro 2. The new Sample Mode lets you easily control all important functions of Traktor's Sample Decks in the Deck A/B layer, perfect for a short transition between these 2 decks.

Roland mug

Review: A Silver mug with SH303 print on front.