DJ replacement parts

Official replacement cable from AIAIAI

Review: The 1.2m cable comes with a 3.5mm mini jack connection in both ends. Specifically adapted, the straight structure and shortened length of the cable makes it very practical for everyday use.

The official replacement cable from AIAIAI is specifically made for the TMA-1. These are the straight version that are lighter and shorter than the coiled style making them ideal for everyday use. 3.9 feet long with 3.5mm mini-jack at both ends.

Replacement rotary fader/ pot for Allen & Heath Xone 92 and S2

Review: Replacement rotary fader potentiometer for Allen & Heath Xone 92 and S2

Review: A Sys-Link card fitted in the mixer allows console-to-console connection to increase the number of input channels. Up to 3 consoles may be daisy-chained.

The Allen & Heath WZ20S/Xone Syslink Option is compatible with other A&H consoles fitted with Sys-Link1.

Official replacement power button cap part for XONE:02 and 32 models

Review: The Allen & Heath button cap is the official replacement part from Allen & Heath, which fits the power button on the Xone:02 and 32 models.

Replacement crossfader for Xone:02 DJ mixer

Review: The Allen & Heath AI4222 is an ultra-high quality Penny & Giles conductive plastic crossfader, which comes fitted as standard on the Xone:02 DJ mixer. Replacement of crossfaders is easy, it takes only minutes to remove the faceplate and replace the fader unit.

Allen & Heath are aware of the expenses involved in running DJ equipment and they appreciate that people need to get every last ounce out of their equipment.

Review: The Allen & Heath knob is the official replacement part from Allen & Heath, which fits the auxillary and rotary pots on the Xone 02 model.

XONE:02 Mixer Replacement P&G Channel Fader/Crossfader

Review: Replacement P&G channel fader/crossfader for Xone:02.

Review: The Allen & Heath button is the official replacement part from Allen & Heath, which fits the auxillary and rotary pots on the Xone:1D, 2D and 42 models.

Official replacement channel fader part for XONE:22 mixer model

Review: The Allen & Heath cross fader is the official replacement part from Allen & Heath, which fits the cross fader of the Xone:22 model.

Review: The Allen & Heath is the official replacement part from Allen & Heath, which fits the cross fader on the Xone:2D.

Rack mount Kit for mounting Xone:32 onto a 9.5" rack

Review: The 9.5" rack mount kit for the Allen & Heath Xone:32 DJ mixer, including rack ears, screws and washers.

Review: The Allen & Heath fader is the official replacement part froM Allen & Heath, which fits the Alpha Channel fader of Xone:32 turntable.

Review: The Allen & Heath red cap is the official replacement part from Allen & Heath, which will fit the tap tempo cap of Xone:02 turntable.

Review: The Allen & Heath switch cap is the offical replacement cap from Allen & Heath, which fits the white switch of Xone:32 turntable.

Official replacement knob part for XONE:42 and 92 mixer models

Review: The Allen & Heath knob is the offical replacement part from Allen & Heath, which fits the Xone:42 and 92 mixers.

Optional 19" rack mount kit for Xone:42

Review: These kits allow non-standard Allen & Heath mixers to be rack-mounted into a 19" unit.

Review: The 5mm Allen & Heath button is the offical replacement part from Allen & Heath, which fits the square button of the Xone:42 turntable.

Review: The Allen & Heath soft black knob is the offical replacement part from Allen & Heath, which fits the knob of the Xone:42 mixer.

Replacement corssfader

Review: This is the replacement crossfader for the Allen & Heath Xone 464 MKI mixer.

Official XONE:4D/02/32/42/62/92 replacement fader knob

Review: The Allen & Heath knob is the official replacement part from Allen & Heath, which fits the fader on the Xone:4D, 02, 32, 42, 62 and 92 models.

Rackmount kit for Xone 62 mixer

B-STOCK: Box opened but product is new, unused and in perfect working order

Review: *** B-STOCK: Box opened but product is new, unused and in perfect working order ***

Xone62 optional 19" rack mount kit panel mode.

Review: The Allen & Heath fader is the official replacement part from Allen & Heath, which fits Xone:62 model. This is a top of the range first class mixer and you'll want to keep it that way.

Official replacement mounting screw part for XONE:62 mixer model

Review: The Allen & Heath crossfader screw is the official replacement part from Allen & Heath, which will fit the mounting screw of the Xone:62 model.

XONE 62 Mixer replacement CUE switch cap

Official replacement front panel screw part for XONE:62 mixer model

Review: A front panel screw for the Allen & Heath XONE:62 series mixer

Review: The Allen & Heath main switch is the official replacement part from Allen & Heath, which fits the switch on the Xone:62 model.

Review: The Allen & Heath MIC/RTN fader is the official replacement part from Allen & Heath, which fits the MIC/RTN fader of the Xone:92 model.

4 faders and mounting plate

Replacement non-contact fader

Review: The crossfader is at the very heart of the DJing experience. So why do so many mixers come with faders that feel like an afterthought? The feel of the crossfader is as important as any other feature of your mixer, so you deserve to have the best at your fingertips.

The Audio Innovate innoFADER has been designed to completely change the way you feel about the crossfader. Having studied the habits and requirements of today's DJs, the innoFADER offers unparalleled levels of quality and adjustability that you just don't find in other crossfaders.

So thanks to the innoFADER, you'll no longer need to be less than satisfied with the stock fader in your mixer. Buy the innoFADER today and change your DJ life for ever.

See http://www.innofader.com/compatible.php for details of mixer compatibility.

*** Customers who purchase any Innovate Crossfader from Juno will receive a free downloadable digital battle break from DJ Rogue - Best Of British Breaks (see: http://bit.ly/Lfw0Z4).
We'll email customers within 48 hours of purchasing the crossfader with their unique voucher code. ***

This is the new PNP version innoFADER which will take the place of the original Innofader.

Purchase the innorFADER PNP, if:
1) You want to save cost.
2) You have a VCA mixer or controller which is Innofader PNP compatible.
3) The future mixers where you plan on using the Innofader PNP are also compatible.


This essentially fits the same mixers as the original Innofader with the following improvements:

Extra knob!
No adapter boards!
On-board wiring tester
Reversible 3 and 4 pin VCA cables
Denon/Rane Empath cable included
Added insulator card on the bottom
Added DJM-800 and DJM-900 mounting brackets
2 vinyl marking stickers included.

Since there are no adapter boards, the installation process is much cleaner and simpler. However, please still be careful during installation and make sure to avoid metal-metal contact between circuit board parts and cables. To be safe, use a piece of electrical tape to wrap the mixer cable plugs.

http://www.youtube.com/watch?v=bnCvx40aO2s

Replacement crossfader for scratching and other extreme mixing styles

Review: *** Customers who purchase any Innovate Crossfader from Juno Records will receive a free downloadable digital battle break from DJ Rogue - Best Of British Breaks (see: http://bit.ly/Lfw0Z4).
We'll email customers within 48 hours of purchasing the crossfader with their unique voucher code. ***

The Innofader Pro uses the same quality construction as the original Innofader and fits the following mixers:

1) All of the Innofader compatible mixers (except for Ecler Eternal compatible mixers you will also need the Ecler Eternal Adapter)
2) Rane TTM-56/57 and Pioneer DJM-800 without any extra adapters.
3) All A&H Xone mixers
4) All mixers previously requiring the Innofader + Innofader Output Adapter (Tascam XS-4, XS-8, old Ecler HAK 300/310/320)
5) Numark M series and Vestax VMC-002 without mods
6) Virtually any analog mixer that fits it, but possibly requiring mods.

In addition to being compatible with a wider range of mixers, the Innofader Pro has the following improvements over the original Innofader:
1) No polarity testing is required. The Innofader Pro is a plug and play device for most mixers.
2) Works over a full +/- 15V or 0 to 30V range.
3) Allows crossfader forward reverse switching on all compatible mixers.

Replacement crossfader designed to fit the American Audio VMS4/4.1/2

Review: The crossfader is at the very heart of the DJing experience. So why do so many mixers come with faders that feel like an afterthought? The feel of the crossfader is as important as any other feature of your mixer, so you deserve to have the best at your fingertips.

The Audio Innovate innoFADER has been designed to completely change the way you feel about the crossfader. Having studied the habits and requirements of today's DJs, the innoFADER offers unparalleled levels of quality and adjustability that you just don't find in other crossfaders.

So thanks to the innoFADER, you'll no longer need to be less than satisfied with the stock fader in your mixer. Buy the innoFADER today and change your DJ life forever.

The Audio Innovate InnoFADER VMS4 is designed for Use with the VMS4, 4.1 & 2.

Replacement crossfader for DDM4000 DJ mixer

Review: Upgrade your DDM4000 DJ mixer with the X1 Infinium Optical Fader. Its patented and contact-free optical technology means the X1 will be functional for countless gigs, all while delivering a truly analog feel and touch. This fader includes complete installation instructions and toolkit.

Channel fader for EVO 4/5, NUO 3/3.0/4/4.0/5

Review: Replacement 5-pin PCB 60mm sliding potentiometer channel fader, for EVO 4/5, NUO 3/3.0/4/4.0/5.

Replacement channel fader for HAK 310/360/380, NUO 2/2.0; cross-fader for AC-6, EVO 4/5, NUO 2/2.0/3/3.0/4/4.0; wet/dry fader for EVO 4/5, HAK 380, NUO 5

Review: Ecler Pro Fader 45mm slider with 3 pin PCB. 3 Pin 45mm Sliding Potentiometer Pro Fader.

Ecler 45mm slide potentiometer. Tested over 4000000 operations with VCA.

For: HAK310 channel faders + crossfader & HAK360 channel faders
For: HAK300 channel faders
For: NUO2 channel faders + crossfader
For: SCLAT 200vs crossfader

Replacement fader cap

Review: Black fader cap with white line, as used on all HAK, EVO and NUO series mixers.

Replacement pot for the rotary control on the Ecler HAK 380

Review: This is a replacement pot for the rotary controls on the Ecler HAK 380. It is also used for all rotary controls on the AC6 mixer.

Ecler mixer replacement large black rotary knob

Review: Ecler mixer replacement large black rotary knob.

Replacement gain control knob

Review: This is a replacement knob for the Gain Controls on the following mixers:

EVO 4
EVO 5
NUO 2
NUO 2.0
NUO 3
NUO 3.0
NUO 4
NUO 4.0
NUO 5.

Replacement rotary knob

Review: Replacement rotary knob from Ecler.

Replacement faceplate and knobs

Review: Style your Maschine MK2 hardware with this set of expressive dragon red magnetic faceplate and knobs. (Tool for easily unscrewing Maschine's knobs included).

Please note: Maschine Custom Kits can only be used with the Maschine Mk2 hardware (black or white edition).

Replacement faceplate and knobs

Review: Style your Maschine MK2 hardware with this set of expressive pink champagne magnetic faceplate and knobs. (Tool for easily unscrewing Maschine's knobs included).

Please note: Maschine Custom Kits can only be used with the Maschine Mk2 hardware (black or white edition).

Replacement faceplate and knobs

Review: Style your Maschine MK2 hardware with this set of expressive smoked graphite magnetic faceplate and knobs. (Tool for easily unscrewing Maschine's knobs included).

Please note: Maschine Custom Kits can only be used with the Maschine Mk2 hardware (black or white edition).

Replacement faceplate and knobs

Review: Style your Maschine MK2 hardware with this set of expressive solid gold magnetic faceplate and knobs. (Tool for easily unscrewing Maschine's knobs included).

Please note: Maschine Custom Kits can only be used with the Maschine Mk2 hardware (black or white edition).

Replacement faceplate and knobs

Review: Style your Maschine MK2 hardware with this set of expressive steel blue magnetic faceplate and knobs. (Tool for easily unscrewing Maschine's knobs included).

Please note: Maschine Custom Kits can only be used with the Maschine Mk2 hardware (black or white edition).

Replacement sleeve for Numark C1/C2/C3/C3FX/C3USB/M1/M1USB/X9 & PRO SMX mixers

Review: Replacement aluminium large toggle sleeve for Numark C1, C2, C3, C3FX, C3USB, M1, M1USB, X9 & PRO SMX mixers

Replacement knob for Numark C1/C2/C3/C3FX/C3USB/M1/M1USB/M2/M3/M4/X1USB/X6/X9 & PRO SMX mixers

Review: Replacement fader knob for Numark C1, C2, C3, C3FX, C3USB, M1, M1USB, M2, M3, M4, X1USB, X6, X9 & PRO SMX Mixers

Replacement knob for Numark DM2000X & DM2002X mixers

Review: Replacement knob/push/transform button for Numark DM2000X & DM2002X mixers.