Studio accessories

Ultra realistic sustain foot pedal

Review: About as close as you can get to natural sustain, the FC3 offers continuous sustain performing exactly as an acoustic piano would. Unlike most common pedals, the FC3 has a unique continuous zone that allows for different types of sustain.

Piano type sustain foot pedal

Review: For those electronic keyboards with an input jack labeled Sustain, the FC4 is used in the same manner the sustain pedal on an acoustic piano is used. A specially designed rubber bottom grips the floor and stays put while you play. The FC4 can also be utilised as an FS controller for synthesizers, tone modules and drum machines.

Foot controlled sustain and trigger pedal

Review: For those electronic keyboards with an input jack labeled "sustain," the FC5 is used in the same manner the sustain pedal on an acoustic piano is used. A specially designed rubber bottom grips the floor and stays put while you play. The FC5 can also be utilized as an FS controller for synthesizers, tone modules and drum machines.

1GB memory expansion board

Review: Acting as an upgrade for the Yamaha Tyros 4 and MOTIF XF series keyboards this 1GB capacity expansion enables you to keep custom sound libraries and settings in internal flash memory, making them instantly available to you on power up.

512mb flash memory expansion

Review: The Yamaha FL512M 512mb flash memory expansion module for Motif XF / Tyros 4 expands the flash memory in your Yamaha synth.

The FL1024M stores and saves your waveforms and samples even when you switch off the synth.

FireWire expansion board

Review: When you install a Yamaha FW16E into your Motif workstation synthesizer, you instantly give it the power and flexibility of a 24bit/96KHz FireWire audio interface capable of transmitting multichannel audio. The FW16E allows you to both send 16 channels of digital audio and receive three stereo pairs of audio input to and from your Motif XF or XS series device via FireWire 400. You also get full multi port MIDI connectivity. With a FW16E, you get all the power of your favorite music production software and the flexibility of your MOTIF in one powerful system!

Replacement music rest for stage piano

Review: Purpose build music rest for CP300, CP33, CP5 & CP50 stage pianos

Universal room treatment kit for absorption and reverberation control of your room or space

Review: The Universal Acoustics Mercury Cluster Room Kit is a specially configured acoustic treatment kit designed to provide realistic and affordable acoustic absorption and reverberation control within most types of rooms and spaces.

This kit provides a dramatic improvement to the audio integrity and sound definition, resulting in an altogether far less fatiguing and more comfortable acoustic environment.

Included in the kit is an installation guide and the appropriate quantity of Space Mist or Cosmic Fluid; specially formulated spray and cartridge adhesives suitable for adhering acoustic foam and polystyrene to most surfaces.

As with all Universal Acoustics products, cluster kits are designed and manufactured in the UK to high technical standards. With high NRC ratings and the relevant fire retardant specifications Universal Acoustics kits will provide years of service and outstanding performance both acoustically and visually.

Universal Acoustics Mercury Cluster Room Kit includes:
14 x Mercury Wedges 50mm - 300x300
6 x Mercury Diffusors 50mm - 300x 300
1 x Space Mist adhesive spray (for foam products)
1 x Cosmic Fluid cartridge adhesive (for polystyrene products)
1 x Installation Guide

Accessory wallet for your OP-1 synthesizer.

Review: Teenage Engineering wallet, finished in black, makes the ultimate accessory for your OP-1 synthesizer. Teenage Engineering wallet comes manufactured from hard wearing polyester and this soft case provides additional storage. OP1 wallet measures 85mm x 85mm, easily attaches to your OP-1 soft case and is perfect for storing all your OP-1 accessories.

Accessory wallet for your OP-1 synthesizer.

Review: Teenage Engineering wallet, finished in green, makes the ultimate accessory for your OP-1 synthesizer. Teenage Engineering wallet comes manufactured from hard wearing polyester and this soft case provides additional storage. OP1 wallet measures 85mm x 85mm, easily attaches to your OP-1 soft case and is perfect for storing all your OP-1 accessories.

3.5mm radio antenna for the OP-1

Review: This is a 3.5mm plug-in radio antenna for the Teenage Engineering OP-1 Synth which turns the OP-1 into a radio.

http://www.youtube.com/watch?feature=player_embedded&v=to3bjSnLZZM

OP1 Bender kit

Review: Pitch Bend/LFO Bend kit, including rubber band for elasticity. Orange plastic.

OP1 Brick Shaft

Review: Use with LEGO compatible gears and motors. Includes four colors. Plastic.

Crank functionality for OP-1

Review: Crank functionality for OP-1. Includes one crank and four color tops. Plastic.

OP1 Display protection

Review: This clear film display protection sheet is made for the Teenage Engineering OP-1 Synth. It protects the screen from dust and scratches and is very easy to apply.

OP1 Strap Loop + 4 M6 covers

Review: Strap Loops for back of OP-1. Use with shoulder strap for added portability. Includes four color M6 covers. Plastic.

OP1 USB cable

Review: The Teenage Engineering custom OP-1 pro USB cable. For charging and file transfer.

Studio frame

Review: The CMC Studio Frame 4 provides a professional way to mount up to four CMC units in a solid frame. With its puristic design, a sturdy construction and practical rubber feet, the CMC Studio Frame 4 is the perfect home for your CMC units. The slight angle guarantees a smooth operation while the included blind plates close the gaps when using less than four CMC units. Best of all, you can even place a USB hub in the frame perfect to keep your desk uncluttered.

Review: A stylish and contemporary mechanical windup metronome features a precision weighted pendulum with settings from 40-208 BPM, audible click, bell with 4 time settings (6/8, 4/4, 3/4, 2/4). It is supplied in a highly polished black case with dust cover.

Rugged universal rack stand with 12 rack spaces

Review: Samson's rugged equipment racks are solid steel and feature fully enclosed steel side panels.

The racks are set upon 4 x heavy-duty, 3" (75mm) casters with locking fronts. Each Samson equipment rack includes a single-space, flanged blank panel. The truly innovative thing is that the unique steel support bar construction allows the racks to be assembled to accept either the European or US thread sizes.

M6 size caged nut for rack mount use

Review: DDAC 007 - EU thread M6 rack steel caged nut

Single of 1U rack panel

Review: Quicklok 1-U blank rack panel.

Plastic washer for use with Quicklok rack mounting screw

Review: RS249 Plastic washer for use with rack mounting screws RS247

10-space rack stand add-on unit

Review: The Quiklok RS515 EU is a10-space rack stand add-on unit with fixed ergonomic operating angle, designed for RS/500 series rack stand system.

The RS/515 can be easily mounted onto RS/507, RS/510, RS/514 and RS/513 rack base units. Ideal to place a mixer on top of your rack equipment stand. Supplied with rack hardware.

EU standard rack screw in M6x15

Review: VTAC 005 - EU standard M6x15 rack screw

10-space table top rack stand for studios or store displays

Review: Affordable and strong, the 10U rack stand is an ideal way to mount your rack gear in a desktop or small workstation environment.

The Quik-Lok RS10 is a 10-space table top rack stand. The QuikLok RS-10 is designed to be a table top rack stand for studios or store displays. The RS-10 is supplied with rack hardware. It is a highly afforable way to mount your rack gear in a desktop or small workstation environment.

Desktop studio control center

Review: Based on PreSonus' hot-selling Central Station Plus rack-mount control center, the Monitor Station enables you to manage multiple audio sources and sets of monitor speakers, simply and easily, right from your desktop.

This convenient control center provides 2 x sets of stereo, line-level analog 1/4" inputs and a pair of RCA analog aux/phono inputs with a defeatable RIAA filter so you can connect a turntable or DVD player.

All 3 x input pairs have the option to be simultaneously available or exclusive, and a mono switch sums the selected stereo source so you can check for phase problems.

Observing the input levels for the main and cue buses is simple with the Monitor Station's dual 8-segment LED meters, which can be referenced to +4, +10, or +18 dBu.

Audition your music with your choice of three stereo pairs of speaker outputs, each with separate level control. All speakers can be simultaneously available, or just one pair at a time, or you can choose between speakers A and B, with speaker output C remaining active to feed a subwoofer. You also get a pair of line-level main outputs, a pair of line-level cue outputs, and four screaming-loud headphone amplifiers with individual level controlsithe equivalent of an HP4 headphone system.

Input selection, speaker selection, and LED meter mode can be set and saved during power up so that you can customize your recording system for the way you work.

A large, conveniently located knob controls the main speaker output level (but not the main line-level outs), and a Dim knob lets you reduce the speaker output by a variable amount. Of course, you can mute the speakers as well.

You can speak to the musicians over the headphone and cue buses using the onboard electret-condenser talkback microphone or connect a mic to the XLR talkback input. The cue signal is automatically dimmed when you use the talkback mic.

You don't need to spend a fortune to get a versatile, high-quality studio control center with professional features. Put your monitoring system conveniently on your desktop and under your fingers with the PreSonus Monitor Station.

http://www.youtube.com/watch?v=qCsRUze1Daw

Removeable, metal music stand for Stage Series 88 & 76, Piano 88, C2 & C1 Organ

Review: The Nord Music Stand EX is a metal music stand stand specifically designed for use with Nord Stage and Digital Pianos.

The Muisc Stand EX from Nord fits onto the back of your instrument and can hold four sheets of music. The stand can be fitted without the use of tools and will fit into the Nord softcase for transportation.

The compatible products:

Nord Stage 2 HA76 & HA88
Nord Stage EX 76 & 88
Nord Stage Classic 88 & 76 revision B and C
Nord Piano 88
Nord Electro 3 HP
Nord C1 Combo Organ.

ABS latching footswitch with 2 x interchangeable colored indents

Review: A robust heavy duty ABS Latching Footswitch with 1.75m heavy duty lead terminated with 6.35 mm mono jack plug. Supplied with 2 interchangeable coloured indents.

ABS momentary footswitch with 1.9m lead terminated with 6.35mm mono jack plug

Review: A robust heavy duty ABS Momentary Foot Switch with 1.9m heavy duty lead terminated with 6.35mm mono jack plug.

The Momentary Footswitch is supplied with 2 x interchangeable coloured indents.

Sustain pedal with 1.9m lead and 6.3mm to 6.3mm jack plug

Review: This Sustain Pedal is perfect for use with keyboards, synths and digital pianos. It features a selectable polarity switch and is equipped with a 1.9m cable terminated with a 6.35mm standard mono plug.

The footswitch can be either push to make or push to break, with an led to indicate whether it is on or off.

Sustain pedal with 1.8m lead and 6.35mm jack plug

Review: This Sustain Pedal is perfect for use with keyboards, synths and digital pianos. The Footswitch can be either push to make or push to break, with an LED to indicate whether it is on or off. It is supplied with a 1.8m long 6.3mm to 6.3mm mono plug lead.

The Sustain Pedal requires 1 x 9V battery (not supplied).

12" long gooseneck lamp for Moog Voyager with BNC connector

Review: High Intensity (5-Watt Halogen) gooseneck lamp for use with BNC connector.

Rack mount kit for enabling you to mount your Minitaur flat or at an angle

Review: Moog's Minitaur Rackmount Kit is pretty much essential if you're gigging with your Minitaur. In the studio, you can tidy up and enhance your productivity by getting your synth off the desktop and into your rack. The Minitaur Rackmount Kit gives you the options of positioning your Minitaur either flat or angled, so your ergonomics will always be ideal. When you're playing out, the Minitaur Rackmount Kit lets you easily mount your Minitaur in a rack case, affording it protection from the rigors of the road.

Gig bag with interchangeable velcro dividers

Review: The Moogerfooger Gig Bag enables you to carry up to 5 Moogerfooger pedals, also suitable for the Rackmount Voyager.

The Moogerfooger Gig Bag comes with interchangeable velcro dividers that can be configured to create many useful compartments. For example, store up to 5 Moogerfoogers with plenty of room for accessories. Or, take your Voyager Rack Mount on the road with utmost confidence that it is well protected.

19" rack mounting kit for VX-351 & CP-251

Review: The VX-351 Rack mount kit can be used to mount the following combinations: 1 VX-351 and 1 CP-251, 1 VX-351, 1 CP-251, 2 VX-351, 2 CP-251.

It is 3-rack spaces high, and is designed to fit any standard 19" equipment rack. It comes with all the necessary hardware and instructions for assembly and installation.

A pair of wood replacement handles designed for the Voyager Rackmount Edition

Review: Wood Handles for Voyager Rackmount Edition: these solid ash handles are both functional and beautiful. The wood has recess handles built-in to make sure you don't lose your grip on the new Voyager Rack Mount Edition.

The RME ships with 4 screws. This means removal and replacement of two screws on each side of the cabinet. These wood handles are a must for anyone planning to use the RME as a table top synth.

3U mounting kit designed for the Moog Slim Phatty

Review: Using your Slim Phatty as part of a modular synth setup, touring or studio rack rig? The Slim Phatty Rack Ears provide secure support and look great.

This kit consists of a pair of 3U rack ears for a Moog Slim Phatty synthesiser module. The kit allows you to rackmount your Moog Slim Phatty in a standard 19" rack.

Wood case panels for use with the Moog Slim Phatty synth

Review: Constructed of ash with a wood-burned Moog icon on the left panel; the Slim Phatty Wood Kit houses your new Moog synth in style. It comes with easy-to-install front and side panels.

The front and dual end-pieces are easy to install and make your Slim Phatty feel right at home next to your Voyager, Taurus 3, Moogerfoogers and more.

Pair of replacement rack ears

Review: In case you lose your ears.

Here is a pair of metal rack ears for the Minimoog Voyager Rack Mount Edition.

Universal expression controller pedal

Review: Feel the need to express yourself fully? M-Audio's EX-P expression controller pedal works with all M-Audio MIDI controllers that have an expression pedal input. A built-in polarity switch insures compatibility with most other brands of controllers and keyboards. Use the EX-P to control any assignable variable MIDI controller value including volume, modulation, panning, filter sweep and more. Durable molded construction with integral cable.

Halogen gooseneck lamp with TNC connector for use with Moog Voyager

Review: High Intensity (5-Watt halogen) gooseneck lamp with TNC connector for use with TNC panel socket.

Available with six, twelve or eighteen-inch gooseneck.

Note: Consoles require a dedicated 12-volt task light connector for use of this product.

Pair of rugged grills designed to protect KRK VXT monitor series

Review: These attractive, rugged metal grills are designed to protect your KRK VXT6 monitor woofer and tweeter while maintaining excellent sonic performance. The rubber gasket and mounting spacers eliminate vibration transfers. Easy to install in minutes without extra tools, the VXT grills are another example why KRK provide the best solutions in audio monitoring.

Note: These grills are only compatible with KRK VXT recording monitors. They are not compatible with other KRK monitors or monitors from other manufacturers.

Universal footswitch

Review: The Korg PS-1 is a universal, non-latching footswitch. The Korg PS-1 features a momentary function and can be used as a sustain pedal when connected to the damper input of Korg keyboards. The PS1 can also be used for the assignable input jack on Korg products, where it will provide various functions depending on the product's settings.

Pedal switch

Review: This low-cost pedal can be used for sustain when connected to the damper input of Korg keyboards. It can also be used for the assignable footswitch jack on Korg products, where it will provide various functions depending on the product's settings. The PS3 features a tough, molded plastic body with a non-slip rubber base.

This reliable momentary footswitch can be used as an accessory with many Korg products to add extra functionality.

Tuner & metronome with needle-style LCD meter

Review: Use the tuner and metronome simultaneously. The TM-50 is your partner to help improve and refine your skills as a musician.

The Korg TM series allows you to use the tuner and metronome simultaneously. Since this single unit is all you need for both pitch and rhythm training, it has become a favorite lesson tool for brass bands as well as many other types of musicians. The TM-50 is the latest model, featuring a 2-level backlight that enhances the visibility of the LCD display. It uses a newly designed needle-style LCD for excellent response, and even greater tuning accuracy. In a first for this series, the entry-level model provides the Sound Back function that allows the speaker to generate the reference tone that's closest to the input sound, giving you a great way to develop and refine your sense of accurate pitch. Available in a choice of 2 x colors, black or pearl white, the TM-50 is the perfect daily practice partner that will support your development as a performer.

The TM-50 features extremely fast response to audio input from wind and other instruments, and the redesigned meter display method allows the pitch to be accurately and instantly shown without any time lag. Wind players will no longer experience the problem of their pitch changing spontaneously before it can be displayed accurately; this ensures that you'll be able to develop stable and drift-free pitch.

The detection range is extremely wide, extending from C1 (32.70Hz) to C8 (4186.0Hz) which covers the note ranges of wind, string, and most other types of instruments. Even potentially difficult instruments that have a low pitch and numerous overtones can be tuned accurately, thanks to Korg's proprietary high-precision technology. The built-in high-sensitivity mic also allows easy and accurate tuning of acoustic instruments such as guitar and ukulele; alternatively, you can use the separately sold CM-100L contact mic to send the vibrations directly to the tuner for even greater reliability.

In addition to visual tuning using the meter, you can use the Sound Out function to produce a reference tone from the internal speaker or headphones, and tune by ear. You can specify the reference tone in a three-octave range from C3 (130.81 Hz) to C6 (1046.50 Hz) which covers a wide variety of instruments.

The tuner can be used not only to detect and inform you of pitch discrepancies, but also as a tool that helps you develop the ability to hear and produce the correct pitch. That's why the TM-50 provides the proprietary Sound Back function* that until now has been featured only on Korg's high-end tuners. Detecting the pitch of your audio input, this function sounds the nearest reference tone from the speaker while the meter shows the pitch difference between your input and the reference tone. Since the pitch is indicated in both visual and audible form, this not only allows you to tune more accurately, but is also an ideal method for training your sense of pitch. Developing your ear in this way is an indispensible way to practice, especially for the beginner.

*This function is available for input via the INPUT jack or when using earphones.

www.youtube.com/watch?v=CRHEuoCnI74

Tuner & metronome with needle-style LCD meter

Review: Use the tuner and metronome simultaneously. The TM-50 is your partner to help improve and refine your skills as a musician.

The Korg TM series allows you to use the tuner and metronome simultaneously. Since this single unit is all you need for both pitch and rhythm training, it has become a favorite lesson tool for brass bands as well as many other types of musicians. The TM-50 is the latest model, featuring a 2-level backlight that enhances the visibility of the LCD display. It uses a newly designed needle-style LCD for excellent response, and even greater tuning accuracy. In a first for this series, the entry-level model provides the Sound Back function that allows the speaker to generate the reference tone that's closest to the input sound, giving you a great way to develop and refine your sense of accurate pitch. Available in a choice of 2 x colors, black or pearl white, the TM-50 is the perfect daily practice partner that will support your development as a performer.

The TM-50 features extremely fast response to audio input from wind and other instruments, and the redesigned meter display method allows the pitch to be accurately and instantly shown without any time lag. Wind players will no longer experience the problem of their pitch changing spontaneously before it can be displayed accurately; this ensures that you'll be able to develop stable and drift-free pitch.

The detection range is extremely wide, extending from C1 (32.70Hz) to C8 (4186.0Hz) which covers the note ranges of wind, string, and most other types of instruments. Even potentially difficult instruments that have a low pitch and numerous overtones can be tuned accurately, thanks to Korg's proprietary high-precision technology. The built-in high-sensitivity mic also allows easy and accurate tuning of acoustic instruments such as guitar and ukulele; alternatively, you can use the separately sold CM-100L contact mic to send the vibrations directly to the tuner for even greater reliability.

In addition to visual tuning using the meter, you can use the Sound Out function to produce a reference tone from the internal speaker or headphones, and tune by ear. You can specify the reference tone in a three-octave range from C3 (130.81 Hz) to C6 (1046.50 Hz) which covers a wide variety of instruments.

The tuner can be used not only to detect and inform you of pitch discrepancies, but also as a tool that helps you develop the ability to hear and produce the correct pitch. That's why the TM-50 provides the proprietary Sound Back function* that until now has been featured only on Korg's high-end tuners. Detecting the pitch of your audio input, this function sounds the nearest reference tone from the speaker while the meter shows the pitch difference between your input and the reference tone. Since the pitch is indicated in both visual and audible form, this not only allows you to tune more accurately, but is also an ideal method for training your sense of pitch. Developing your ear in this way is an indispensible way to practice, especially for the beginner.

*This function is available for input via the INPUT jack or when using earphones.

www.youtube.com/watch?v=CRHEuoCnI74

Speaker calibration kit designed to calibate JBL 4300 series monitors

Review: The JBL LSR 4300 Accessory Kit is the ideal tool for perfectly calibration any monitor in the 4300 series from JBL.

The JBL LSR4300 Kit includes:

Measurement microphone
USB Cable
Remote
Computer software.

B-STOCK: Box opened, product in excellent condition and in perfect working order

Review: *** B-STOCK: Box opened, product in excellent condition and in perfect working order ***

The JBL LSR 4300 Accessory Kit is the ideal tool for perfectly calibration any monitor in the 4300 series from JBL.

The JBL LSR4300 Kit includes:

Measurement microphone
USB Cable
Remote
Computer software.

Studio monitor controller and room mode calibration equipment

Review: Command all control room monitoring functions right from your mix position with the MSC1 Monitor System Controller. In a convenient desktop form-factor, the MSC1 provides essential monitor strip features found in large mixing consoles. Since the acoustics of your room can play a big part in what you hear, the MSC1 includes JBL's highly acclaimed RMC Room Mode Correction Technology, which measures your room and tackles low frequency problems caused by room modes and boundary conditions. The end result is a calibrated reference environment in which your speakers work in harmony with your room to take the guesswork out of mixing. Once your system has been measured, re-calibration of your speakers is fast and easy and can be done at any time. After RMC calibration, the MSC1 works as a stand-alone controller and connection to a computer is not required. With RMC you can tune your monitor system for greater clarity at the mix position.

The MSC1 is designed to work with any studio monitor system in any room. No matter what speaker system you own, you can have a truly calibated environment, fine-tuned to give you your best mixes. In addition to managing RMC Calibration, the MSC1 Control Centre software provides fine control of monitor EQ, speaker alignment delay, subwoofer balance, and bass management crossover settings.