Studio monitors

Pair of speakers & amplifier + pair of monitor stands

Review: This great value bundle mixes up the unique sE Electronics Egg monitors with their specially designed Zaor stands. The Zaor stands make them sturdy and wood has virtually no self-resonance so they won't add any annoying vibration.

The sE Munro Egg 150 Monitoring System is the first in a series of sE Munro Active Integrated Monitoring Systems, designed by Andy Munro, James Ishmaev-Young and Siwei Zou.

The sE Munro Egg studio monitors have brought about a fundamental rethink of the loudspeaker engineering process. The traditional wooden box has been replaced by a curved enclosure that has been scientifically proven to virtually eliminate diffraction and resonant effects that distort and smear the original sound of your audio.

The result is a stunning clarity that brings the smallest details into focus and yet delivers the entire mix as a coherent whole.

Controlling the sE Munro Egg 150 Monitoring System:

The system is complete, with a free standing control unit that delivers a perfect bi-amplified power match to the egg drive units, source select inputs, active analogue crossovers, LF and HF trim pot equalisation for room and location set-up compensation and a mid-band control to emulate the mid-range response of both Hi-Fi and NS10 type speakers.

Above all, the sE Munro Egg 150 Monitors are designed to deliver the highest quality sound with the absolute minimum of coloration.

The Egg 150 monitors feature breath-taking transparency that, within seconds of listening, reveals a much more defined and open mix in which the whole balance simply feels more complete. Certain aspects of some recordings may be shown up to be distorted or not as the engineer intended, but that is the truth, unobscured by colouration. A monitor that flatters to deceive has no place in a professional recording studio and there is no argument for using poor quality speakers to match inferior playback media.

Well recorded audio, translates to any medium, but the opposite is absolutely not true, if your monitors put a fake 'sheen' on everything, how will you ever know what your material sounds like on an honest system?

By using high quality linear power supplies, the sE Egg system maintains maximum transient power up to double the rated value. Bi-amplification further enhances the power headroom and results in the lowest possible distortion values. By using 35V power rails the Egg is capable of high transient sound levels from a relatively modest amplifier compliment.

The sE Munro Egg 150 is the final product name of the sE Munro Medium Egg Speaker, announced at Musikmesse and NAMM. The 150 refers to the approximate size of the driver. As more Egg Monitoring Systems are in development, it seemed foolish to term the first sE Munro speaker system as medium when it may not be in the fullness of time.

http://www.youtube.com/watch?feature=player_embedded&v=kYXqjd9Jc3U

Zaor monitor stands feature a sturdy, height-adjustable design and are an ideal solution for supporting your precious monitors in the studio. Their solid wooden design makes Zaor monitor stands far more stable than cheaper height-adjustable speaker stands. The fact that they are constructed from wood also means that they have practically no self resonance, so you won't hear any annoying vibrations whilst trying to balance your mix.

Studio monitors

Review: The reference standard of the CMS line, the CMS 65 received the 2008 Excellence Award from Pro Audio Review magazine due to its amazing size/price/performance ratio. Its extended response at 45Hz (-3 dB) allows installation without a subwoofer.

The CMS 65 monitors are characterized by treble definition, midrange transparency and adjustable control of the midbass and bass registers. The tonal balance is extremely stable, even at very loud volumes, ensuring accurate reproduction when mixing and mastering.

As a powered unit, the Focal CMS 65 features 100W low frequency and 60W high frequency amplifier. Supplied with a decoupling rubber sole, 4 rubber spikes, 2 height-adjustable spikes for installation at the front or rear, and 2 removable grilles to protect the woofer and tweeter.

www.youtube.com/watch?v=bGaFFFdp-z8

Review: The compact 8030 is a powerful bi-amplified nearfield 2-way monitor system ideal for project and home studios, workstations, installations, and surround sound monitoring.

The MDE (Minimum Diffraction Enclosure) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.

Like all Genelec 8000 Series monitors, the 8030 also features the advanced Genelec Directivity Control Waveguide (DCW), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.

Review: Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.

The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.

With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.

Pair of high resolution DSP studio reference monitor speakers

Review: The Studiophile DSM1 reference monitor is engineered to provide superior monitoring to discerning audio professionals. The design results from collaboration between two powerhouse companies in music technology, M-Audio, the top US manufacturer of reference monitors and Digidesign, the industry leader in DSP technology. The DSM1 monitor features DSP-based crossover management, an assortment of onboard digital EQ controls, proprietary high-grade driver designs and analog & digital inputs for high-resolution audio up to 24 bit/192kHz. With stunning accuracy, clarity and dynamic range, the Studiophile DSM1 monitor makes world-class reference technology accessible to a broad array of creative and professional environments.

http://www.youtube.com/watch?v=jYrU_0EaovA

Review: The trend towards choosing powered speakers for production monitoring is based on some very sound logic. By integrating and matching the power amplifiers and speakers, the relationship between them can be kept under perfect control for superior performance in the widest possible range of systems. Naturally the power amplifiers themselves are of the finest quality and, unlike component power amplifiers that must be designed for acceptable matching with the widest possible range of speakers, are designed and manufactured specifically to drive the system's woofer and tweeter in their specific enclosure.

With the MSP7 everything you need is built in - all you have to do is supply the line level input. The 6.5 inch cone woofer is driven by an 80watt power amplifier, while the 1 inch dome tweeter has its own 50watt power amplifier. In the MSP7 this particular power and driver combination results in the perfect balance between the low, mid and high frequency ranges.

The MSP7 woofer and tweeter units feature some important design innovations that contribute directly to improved sound quality. The 6.5 inch woofer, for example, features a specially treated polypropylene cone with lowdamping rubber surrounds for exceptionally smooth response. Low reflection and high rigidity die-cast magnesium baskets both maximize mechanical precision while minimizing unwanted coloration of the speaker's output. The 1 inch tweeters feature titanium domes that offer the perfect combination of light weight and rigidity for precise reproduction right up to 40 kHz.

This obstacle of magnetic interference is effectively overcome in the MSP7 with a new "advanced magnetic structure" that achieves effective shielding while maintaining the integrity of the speaker's magnetic circuit for significantly lower distortion and improved definition
.
The thick walled MSP7 cabinet is moulded in one piece, resulting in smooth acoustic transfer throughout the entire enclosure for superior reproduction precision. One piece moulding also makes it possible to produce the large radius rounded baffle corners that help to maintain a natural wavefront and minimize diffraction for a smoother, more uniform polar response.

The MSP7 STUDIO features a balanced XLR-type connector for input. Providing direct compatibility with professional gear and allows the use of balanced lines for maximum audio quality even where long cable runs are required. Rear-panel controls include a continuous input sensitivity control, and trim switches that enable you to adjust the bass and treble in four and three positions, respectively (+1.5dB / 0dB / -1.5dB/ -3dB at 50Hz and +1.5dB / 0dB / -1.5dB at 10KHz), so that the system's response to be quickly matched to the room. There's also a low cut switch that is useful when used with the SW10 subwoofer. The AC power cord is removable for easy transportation and setup.

Some speakers are designed to look good. The MSP7 has been designed throughout for superior sound, and looks great as a result!

Review: The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over 3 dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world's largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The X stands for extended frequency response and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a tweeter gain control, (+/- 4dB) and 2 shelving filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review: With the A7X monitor, Adam Audio proudly presents the evolution of a legend. The first aspect that distinguishes the old from the new model is the X-ART tweeter. The X stands for eXtended frequency response and thus for one of the features of the accelerating ribbon technology that has been drastically improved: the frequency response. It now extends all the way up to 50 kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (-/+ 4 dB) and 2 shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review: Most professional and commercial facilities offer clients a broad choice of studio monitors, from near to mid, or even main field systems so that they can test their mixes across several environments. In the private, project and home studio environment, 1 monitoring system might have to do it all: the ability to generate huge sound pressure levels when the music and clients demand it, yet maintain the clarity and transparency of a professional studio monitor. Having this level of capability and flexibility at a cost effective price hasn't been available in a single system.

The Rokit RP10-3 monitor is a mid-field 3-way monitor system in a compact form factor and at a breakthrough price that delivers loud and accurate sound reproduction to satisfy professional needs. The RP10-3 monitor will suit commercial facilities in need of more capable mid-fields as well as space and budget conscious private studios. The pro-studio appearance of this monitor will visually impress and the high SPL output makes it capable of handling challenging high dynamic tracks for all genres of music.

With space and placement of mid-fields virtually always a concern in recording, mobile and broadcast facilities, the Rokit RP10-3 monitor offers location flexibility by placing the tweeter and midrange in a unique rotatable housing. Whether they are vertically placed on their side or wall mounted, the proper orientation of the acoustic axis can be maintained.

Studio monitors

Review: The Akai RPM8 reference production studio monitor is specifically designed for use with MPC music production workstations and production controllers. The RPM8 studio monitors are 2-way, active, bi-amplified, nearfield loudspeakers made for producers, recording engineers, remix artists, DJs and other musicians.

The 2-way monitors each feature an 8" woven-kevlar low-frequency driver with 80W RMS of continuous amplification for robust, full bass all the way down to 39 Hz. The monitors' high-frequency system consists of a 1" silk-dome tweeter with 40W RMS of continuous amplification, mounted on a custom, functionally optimized waveguide for excellent control of directivity and reduction of unwanted early reflections. The RPM8 studio monitors contain active, fourth-order crossovers for outstanding separation and optimal power management. Their cabinet is constructed of industry-standard MDF for low resonance and is dually ported on the front baffle for bass extension in any setting, including soffit-mounted installations.

The bi-amplification, ported cabinet design and overall acoustical efficiency combine to produce a speaker that can deliver up to powerful 113 dB SPL and with accurate frequency response from 39Hz to 20 kHz. The RPM8 monitors feature a bicolor LED clip indicator, which assists in avoiding damage to your system. You can connect professional studio systems to the RPM8's combination XLR-balanced 14" TRS inputs for compatibility with a wide variety of source equipment.

www.youtube.com/watch?v=jqyF2fwHX5s

Review: Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.

The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.

With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.

http://www.youtube.com/watch?feature=player_embedded&v=j84Z4wkJQIg

Review: The Sonodyne SM 50Ak studio monitor is ideal for not only desktop editing but also serious audio monitoring. It provides a well articulated yet full bodied response from its compact enclosure. The highs are open, the mids well resolved and the bass detailed and tight.

The Sonodyne SM 50Ak monitor is magnetically shielded and can be placed beside video monitors without interference. It has the facility for both console and wall mounting.

Review: The 8020C PM is a variation of the previous 8020B model, now incorporating power management technology which enables the speaker to run on a low power setting when not in use.

The small Genelec 8020B has been designed for monitoring in difficult listening environments, particularly those compromised by lack of space.

However, size is no handicap to performance as the 8020B two-way active monitoring system incorporates Genelec's acoustic design innovations to minimise all forms of distortion.

The 8020B has a die-cast aluminium Minimum Diffraction Enclosure (MDE), which features relatively large internal volumes; softly curved edges and outstanding mechanical strength.

As a result, the imaging accuracy and low frequency extension with such a compact enclosure are truly astounding.

Review: The LSR2328P bi-amplified 2-way model is based on an 8" (203mm) long excursion woofer and a 1" (25mm) soft dome tweeter. It includes balanced XLR, balanced 1/4" TRS, and RCA unbalanced input connectors to allow connection of professional mixing consoles, computer audio interfaces, audio visual equipment, and consumer audio systems. A detented level control allows fine adjustment of individual speaker levels to balance each speaker in the system. Low frequency and high frequency trim controls let you tailor the speaker's response to preference or room acoustics. A neoprene rubber pad on the bottom of the speaker provides acoustic isolation and increases stability when the speaker is placed on a speaker stand or a console top. Mounting points are included and the enclosure has been reinforced for safe mounting using industry-standard mounting hardware.

Review: The small Genelec 8020B (height with Iso-Pod 242mm, width 151mm and depth 142mm) has been designed for monitoring in difficult listening environments, particularly those compromised by lack of space.

The 8020B has a die-cast aluminium Minimum Diffraction Enclosure (MDE), which features relatively large internal volumes; softly curved edges and outstanding mechanical strength. As a result, the imaging accuracy and low frequency extension with such a compact enclosure are truly astounding.

The 8020B also incorporates the advanced Directivity Control Waveguide (DCW), which provides an amazingly smooth on and off axis response; while the long, curved reflex port ends in a wide flare for excellent bass articulation.

Each monitor features a 105mm (4") bass driver along with a 19mm (3/4") tweeter loaded into a new advanced Genelec Directivity Controlled Waveguide (DCW). The free field frequency response is 66Hz to 20 kHz (2.5 dB). Maximum peak SPL output per pair with music material is 105 dB at 1m. Bass and treble are each powered by 20W amplifiers.

The 8020B can be combined with the new 7050B Laminar Spiral Enclosure (LSE) subwoofer to provide a powerful, bass-managed and wide bandwidth surround sound monitoring system.

Review: The new Focal CMS 40 monitor targets for broadcast and post-production environments, combines sound neutrality, extended bass frequency, high dynamics and absence of distortion at high sound levels, all in an ultra-compact speaker.

The Focal CMS 40 is the most compact studio monitor of the Focal professional range. Its size/extended bass frequency ratio ensures excellent versatility. This CMS 40 monitor guarantees ultra-realistic voicing, whilst offering optimum acoustic integration. The CMS 40 monitor design allows near-field listening from as little as 16" without compromising sound neutrality or the delicate mid-bass and bass balance. Its compact size, combined with mounting points at the back and under the monitor, makes it easy to install even in the smallest post-production rooms.

The Focal CMS 40 monitor is a perfect tool for post-production and home studios. Even in the biggest and best studios, it proves to be an excellent second monitoring system, which allows engineers to quickly check how the mix translates onto smaller speakers, or for use as a compact 5.1 channel surround system.

Review: The small Adam A5 monitor managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one of the best small monitors and a great choice for the small studio. The similar dimensions and name could make one believe that the Adam A5X monitor is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.

The Adam A5X monitor features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.

A 5.5" Midwoofer reproduces the frequencies below 2.5 kHz. The diaphragm is made from carbon fiber/rohacell/glass fiber. This composite material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.

A very handy and exclusive feature found in the 2 smaller A5X monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects 2 A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for mixer-less desktop applications where overall system volume needs to be adjusted easily.

The front of the A5X monitor sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also 2 M6 (6mm) metric screw threads for stand/wall mounting.

Pair of professional audio monitors

Review: Created for larger rooms, the Fostex PM-2 MKII monitors have the power, sophistication and most importantly the versatility to handle the most demanding recording applications. Equipped with a 200mm low frequency unit and remaining natural and transparent right across the audio spectrum even at high sound pressure levels, the Fostex PM-2 monitors are great for today's bass heavy music.

The exceptional audio performances of Fostex PM-1 MKII monitors are matched to jaw-dropping good looks. Fostex strive to design and build studio monitoring systems which enable you to experience your unique sound in all its dimensions. Through tireless research and development, endless measurements and real-world listening tests, Fostex's engineers have achieved this in the form of the beautiful second generation PM-series monitors.

Capitalizing on Fostex's supreme knowledge of acoustics and speaker engineering, now offering a brighter and tighter sound, these PM-2 studio monitors are designed inside out to provide the best monitoring experience with minimal resonance, sparkling highs and rich, deep lows. With new high-gloss front baffles, they also look as stunning as they sound.

The LF drivers of PM-2 MkII monitors have been developed to obtain extremely pure music reproduction by employing the latest technology in cone material. The cone uses a mixture of cut and milled fibers that are made from aromatic polyamide. It is then impregnated with resins to simultaneously achieve high rigidity and optimum damping. The cone also has an olefin film thermally adhered to its surface to control frequency response and to establish long term reliability. The center dust cap is made of non-wood cellulose material and is also impregnated with resin. The voice coil is made of super high purity copper wire to achieve extremely low distortion. The 20mm soft dome tweeter employs Fostex's UFLC technology (poly urethane film laminated cloth) to achieve light weight and high stability performance. The amplifiers are precisely calibrated to match the performance capability of the drivers.

20W stereo rack monitor, ideal solution for monitoring in space-challenged environments

Review: The Fostex RM-2 is the ideal solution for monitoring needs in various space-challenged environments.

The Fostex RM2 is great for use in space-conscious situations such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, the RM-2 is now more versatile to various applications.

http://www.youtube.com/watch?v=K5w-OvdmcC4

Review: This glossy white edition of the ADAM A5 is exclusively available at Juno.

The ADAM A5 is the smaller brother of the A7, probably the best known of all the ADAM monitors. The A5 uses the same ADAM proprietary transducer technology (ART) and the same woofer consisting of a sandwich construction of carbon fiber and Rohacellr, only reduced in size to 5 .5 inch. The outstanding sound quality in combination with the small size, the glossy white finish and the Stereolinkr make the A5 a truly unique loudspeaker with an almost unlimited range of applications.

Amplifiers and controls: Two built-in 25 Watt amplifiers power the drivers directly. The front of the A5 sports dual ports for surprising low frequency response down to 55Hz, metal grills for durability, as well as power and gain controls. The rear panel includes balanced (XLR) jacks, unbalanced (RCA) jacks, and a host of EQ controls to tailor the sound to suit room acoustics or personal taste.

Stereolink: The A5 employs a new development by ADAM called Stereolink. This new technology connects two A5 speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5 a natural for "mixer-less" desktop applications where overall system volume needs to be adjusted often and from a single control.

Single nearfield/midfield monitor

Review: With its power and radiation characteristics, the brand new Adam A8X monitor is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X monitor is equipped with the X-ART tweeter and a large (8.5") midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter.

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (-/+ 4dB) and 2 shelf filters for the high and low frequencies. There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

www.youtube.com/watch?v=vJS3Unhp4vY

Single bi-amplified nearfield 2-way monitor

Review: The compact 8030 is a powerful bi-amplified nearfield 2-way monitor system ideal for project and home studios, workstations, installations, and surround sound monitoring.

The MDE (Minimum Diffraction Enclosure) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.

Like all Genelec 8000 Series monitors, the 8030 also features the advanced Genelec Directivity Control Waveguide (DCW), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.

Review: The uniK 08 monitor is the result of extensive development work done in Germany, to provide a professional active reference monitor that defines a new level of quality in this class.

The monitor features a new 8" Kevlar low frequency driver and a custom engineered and powerful high frequency ribbon tweeter with an extraordinary light membrane. This provides a very clear, strong and precise sound image especially in the high frequencies. With less moving mass compared to conventional tweeters, a new level of impulse response with minimized distortion is achieved. In combination with the optimized mechanical design of the cabinet, the uniK 08 provides special and truly unique sound characteristics that allow this monitor to satisfy the highest demands in a professional studio environment.

high resolution reference monitors

Review: Listen to a pair of powered Fostex NX-5A reference monitors, you'll discover a superb natural sound with little colouration, deep tight lows and crystal clear highs, precise stereo imaging and an almost complete lack of distortion even at high sound pressure levels.

Full of the latest in speaker technology and designed from the ground up for critical listening in both professional and project studios, broadcast and editing suites or any other recording facility where a precise, transparent and professional sound is essential, the NX-5A monitors set new standards in sonic accuracy and packaging.

Created to offer a professional nearfield monitoring solution in tight spaces, the compact NX-5A monitors excel in just about every department. The sound is full of clarity and audio accuracy, the stereo imaging is sharp and consistent and the level of sonic detail is incredible from a pair of monitors so small.

The engineering is superb with an internal wall design which eliminates standing waves, precision aluminum frames minimizing unwanted vibrations and a woofer which features a UDR tangential driver edge to eliminate unwanted resonances.

High resolution DSP studio reference monitor speaker

Review: The Studiophile DSM1 reference monitor is engineered to provide superior monitoring to discerning audio professionals. The design results from collaboration between two powerhouse companies in music technology, M-Audio, the top US manufacturer of reference monitors and Digidesign, the industry leader in DSP technology. The DSM1 monitor features DSP-based crossover management, an assortment of onboard digital EQ controls, proprietary high-grade driver designs and analog & digital inputs for high-resolution audio up to 24 bit/192kHz. With stunning accuracy, clarity and dynamic range, the Studiophile DSM1 monitor makes world-class reference technology accessible to a broad array of creative and professional environments.

2-way 360W active monitor

Review: Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.

The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.

With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.

Review: The ADAM F7 has been designed to offer ADAM quality at a more affordable price. The F7 shares characteristics with their renowned A7X, but sports a redesigned ART tweeter and woofer. Although cheaper, it sacrifices nothing in quality and offers an excellent monitoring experience.

The F7 features ADAM Audio's proprietary Accelerating Ribbon Technology, the most famous of all ADAM inventions, assuring the utmost clarity of the high frequencies. The 7" carbon/paper-midwoofer comes with a 37mm voice coil. It has been designed to perfectly complement the ART tweeter and offers a crisp, deep bass response and along with focused mid-range clarity. The F7 also offers several controls to adjust the monitors to the environment, all of which located on the rear panel: 2 room EQ's for both the high (>5 kHz) and the low (<300 Hz) frequencies as well as a volume knob.

The ADAM F7 brings you the essence of ADAM speakers at a new, lower price point.

http://www.youtube.com/watch?v=RL7UB63u-mA

Pair of professional 2-way active DJ & producer reference monitor speakers

Review: Reloop are proud to present the Wave Monitoring Station, a practical monitoring powerhouse for every DJ and producer's setup.

The active reference monitor speakers are in a class of their own due to their precise playback and powerful rich output. The innovative design makes them ideal for DJs monitoring live in the mix, and thanks to the linear frequency-response curve, producers will also appreciate the Reloop Waves series as reference monitor speakers for studio applications. With a total of three different inputs (XLR, 6.3mm jack, and RCA) the flexibility on offer is unparalleled as different sources can be directly connected and monitored, eradicating annoying re-wiring or searching for switches in your cable set up. But what really defines these speakers as the ultimate monitoring station is the External Wave Controller. By accessing this solid control unit, it's simple to command both speakers from the comfort of your desktop (connected via a link cable). With the extra large aluminum knob, the volume can be adjusted effortlessly, and via the Input Selector it's possible to quickly toggle between the 3 different inputs options (each clearly indicated by a glistening white LED on the front). A further switch can be used to set the station on stand-by, and with a push of a button, the output can be muted (LEDs will be dimmed depending on the status selected). Thanks to the variable EQ and frequency band adjustments, the Wave series can be instantly adapted to almost any room or situation without the need for a sub mixer. The smart tweeter construction has an especially wide audio beam in order to deliver outstanding sound to the listener from various positions, and strong magnetic drivers create the powerful rich sound demanded by the discerning DJs and producers of today.

It's important to stress that while the speakers were in development, Reloop strived for the highest quality components, fine-tuning, and sophisticated design. The result clearly speaks for itself. Aesthetics, versatility and performance are all masterfully combined in this exciting new desktop monitoring station. Welcome to Reloop Wave.

Pair of powered reference monitors

Review: The Fostex 6301BX compact powered monitor is a small, portable, versatile monitor that delivers impressive sound.

The Fostex 6301BX compact powered monitor is ideal for use with instruments in project studios, on stage, in remote recording vehicles, video productions and multimedia presentations.

Review: The 6010BWM has been designed for monitoring in difficult listening environments, particularly those compromised by lack of space. Its small size, amazing sound quality and rugged construction make the 6010BWM an ideal sound system for the traveling professional user and a constant source of listening enjoyment.

The 6010BWM is a variation of the previous 1060B model now incorporating power management technology, making the monitor compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices. This feature reduces power consumption to less than 0.5 watts by automatically switching the monitor to standby when no audio signal has been detectedfor some time.

Designed by Genelec's R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 6010BWM contains its own power amplifiers, active crossover filters and automatic protection circuitry. The cast aluminium Minimum Diffraction Enclosure (MDE) and advanced Directivity Control Waveguide (DCW) technologies are carefully matched with advanced amplifier and electronic circuitry and the latest drivers. In addition, RCA line level audio connectors provide direct connection to a computer sound card, portable MP3 player or preamplifiers. This makes the 6010BWM not only ideal for studio environments, but also media and post production applications.

Review: The MSP5 features a bi-amplified bass reflex system that delivers outstanding monitoring precision for digital or analog production in stereo or surround formats. The more compact dimensions of the MSP5 make it an ideal choice for smaller project studios and DAW based production systems. MSP5 features a 5 inch cone woofer driven by a 40 watt amplifier and a 1 inch dome tweeter driven by a 27 watt amplifier. Other than woofer size, enclosure size, and amplifier power, this monitor takes advantage of the same advanced materials and design technology that are behind the extraordinary performance of the larger MSP7. The woofer and titanium dome tweeter feature advanced magnetic structures that achieve exceptionally low distortion, and the tweeter works with a unique waveguide horn that achieves broad, uniform high frequency dispersion over 120 degrees for optimum balance regardless of listening position.

Advanced driver and enclosure design including the low diffraction rounded baffle, ensure smooth, uniform dispersion across the system's full reproduction range. Flat frequency response up to 40 kHz makes the MSP5 great for mastering, where high sample and bit rates are the norm.

Along with their compact size and excellent performance, full magnetic shielding allows the MSP5 monitors to be positioned near all types of audio, video, and computer equipment without sound degradation or negative effects on surrounding equipment.

The MSP5 has a balanced XLR type input for direct compatibility with professional equipment. Balanced lines are ideal if the speakers are to be placed at the end of long cable runs which, if unbalanced, might be susceptible to hum and induced noise. The MSP5 also offers an unbalanced 1/4" phone jack connector.

These fantastic compact monitors are also equipped with four position low and three position high trim switches that allow the system's response to be optimised for a wide range of acoustic environments.

Studio monitor with 6.5" woofer and 1" tweeter

Review: The trend towards choosing powered speakers for production monitoring is based on some very sound logic. By integrating and matching the power amplifiers and speakers, the relationship between them can be kept under perfect control for superior performance in the widest possible range of systems. Naturally the power amplifiers themselves are of the finest quality and, unlike component power amplifiers that must be designed for acceptable matching with the widest possible range of speakers, are designed and manufactured specifically to drive the system's woofer and tweeter in their specific enclosure.

With the MSP7 everything you need is built in - all you have to do is supply the line level input. The 6.5" cone woofer is driven by an 80watt power amplifier, while the 1" dome tweeter has its own 50watt power amplifier. In the MSP7 this particular power and driver combination results in the perfect balance between the low, mid and high frequency ranges.

The MSP7 woofer and tweeter units feature some important design innovations that contribute directly to improved sound quality. The 6.5" woofer, for example, features a specially treated polypropylene cone with lowdamping rubber surrounds for exceptionally smooth response. Low reflection and high rigidity die-cast magnesium baskets both maximize mechanical precision while minimizing unwanted coloration of the speaker's output. The 1" tweeter features a titanium dome that offer the perfect combination of light weight and rigidity for precise reproduction right up to 40 kHz.

This obstacle of magnetic interference is effectively overcome in the MSP7 with a new "advanced magnetic structure" that achieves effective shielding while maintaining the integrity of the speaker's magnetic circuit for significantly lower distortion and improved definition
.
The thick walled MSP7 cabinet is moulded in one piece, resulting in smooth acoustic transfer throughout the entire enclosure for superior reproduction precision. One piece moulding also makes it possible to produce the large radius rounded baffle corners that help to maintain a natural wavefront and minimize diffraction for a smoother, more uniform polar response.

The MSP7 STUDIO features a balanced XLR-type connector for input. Providing direct compatibility with professional gear and allows the use of balanced lines for maximum audio quality even where long cable runs are required. Rear-panel controls include a continuous input sensitivity control, and trim switches that enable you to adjust the bass and treble in four and three positions, respectively (+1.5dB / 0dB / -1.5dB/ -3dB at 50Hz and +1.5dB / 0dB / -1.5dB at 10KHz), so that the system's response to be quickly matched to the room. There's also a low cut switch that is useful when used with the SW10 subwoofer. The AC power cord is removable for easy transportation and setup.

Some speakers are designed to look good. The MSP7 has been designed throughout for superior sound, and looks great as a result!

Rokit powered series active 3-way mid-field monitor

Review: Most professional and commercial facilities offer clients a broad choice of studio monitors, from near to mid, or even main field systems so that they can test their mixes across several environments. In the private, project and home studio environment, 1 monitoring system might have to do it all: the ability to generate huge sound pressure levels when the music and clients demand it, yet maintain the clarity and transparency of a professional studio monitor. Having this level of capability and flexibility at a cost effective price hasn't been available in a single system.

The Rokit RP10-3 monitor is a mid-field 3-way monitor system in a compact form factor and at a breakthrough price that delivers loud and accurate sound reproduction to satisfy professional needs. The RP10-3 monitor will suit commercial facilities in need of more capable mid-fields as well as space and budget conscious private studios. The pro-studio appearance of this monitor will visually impress and the high SPL output makes it capable of handling challenging high dynamic tracks for all genres of music.

With space and placement of mid-fields virtually always a concern in recording, mobile and broadcast facilities, the Rokit RP10-3 monitor offers location flexibility by placing the tweeter and midrange in a unique rotatable housing. Whether they are vertically placed on their side or wall mounted, the proper orientation of the acoustic axis can be maintained.

Single nearfield monitor

Review: With the A7X monitor, Adam Audio proudly presents the evolution of a legend. The first aspect that distinguishes the old from the new model is the X-ART tweeter. The X stands for eXtended frequency response and thus for one of the features of the accelerating ribbon technology that has been drastically improved: the frequency response. It now extends all the way up to 50 kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (-/+ 4 dB) and 2 shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review: The PM641 3-way monitor speaker from Fostex offers a 6.5" woofer, 4" midrange and a 3/4" tweeter.

Powered by a 50W, 18W and 18W independent amplifier for wider frequency range reproduction, the PM641 represents the perfect blend of affordability and excellent sound reproduction.

Review: The Akai RPM8 reference production studio monitor is specifically designed for use with MPC music production workstations and production controllers. The RPM8 studio monitors are 2-way, active, bi-amplified, nearfield loudspeakers made for producers, recording engineers, remix artists, DJs and other musicians.

The 2-way monitors each feature an 8" woven-kevlar low-frequency driver with 80W RMS of continuous amplification for robust, full bass all the way down to 39 Hz. The monitors' high-frequency system consists of a 1" silk-dome tweeter with 40W RMS of continuous amplification, mounted on a custom, functionally optimized waveguide for excellent control of directivity and reduction of unwanted early reflections. The RPM8 studio monitors contain active, fourth-order crossovers for outstanding separation and optimal power management. Their cabinet is constructed of industry-standard MDF for low resonance and is dually ported on the front baffle for bass extension in any setting, including soffit-mounted installations.

The bi-amplification, ported cabinet design and overall acoustical efficiency combine to produce a speaker that can deliver up to powerful 113 dB SPL and with accurate frequency response from 39Hz to 20 kHz. The RPM8 monitors feature a bicolor LED clip indicator, which assists in avoiding damage to your system. You can connect professional studio systems to the RPM8's combination XLR-balanced 14" TRS inputs for compatibility with a wide variety of source equipment.

www.youtube.com/watch?v=jqyF2fwHX5s

7" active nearfield monitor

Review: The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over 3 dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world's largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The X stands for eXtended frequency response and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (+/- 4dB) and 2 x shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Stereo monitoring system includes 2 x satellite speakers and 1 x subwoofer

Review: Blue Sky are now a familiar name in the monitoring world, and many of the company's visually distinctive products manage to straddle the home studio and home theatre markets. Their new Exo 2.1 stereo monitoring system uses 2 relatively small satellite speakers and a floor-standing subwoofer to provide full-range coverage, with a desktop remote-control hub providing a means to control the level of the bass and the overall volume. This hub also functions as an input-source connection point, as it includes an iPod input and 3.5mm headphone jack on the front, as well as both XLR/jack combi and phono connectors on the rear. When the headphone jack is used, the speakers are automatically muted.

The Exo 2-way satellite speakers are based around a 3" neodymium concave driver, augmented by a 1" soft-dome neodymium tweeter that sits behind 3 protective bars. The crossover within the satellite is passive and each speaker is powered by its own 35W amplifier, which is housed in the sub so that all the amp and PSU circuitry is situated in one place. Speaker connections are made between the satellites and sub using conventional binding posts, and suitable cables are included with the system. The satellite enclosures are built from three-quarter-inch MDF and feature a textured, black-finish front baffle. They measure just 203mm x 127mm x 127mm and weigh a modest 1.36kg each. Magnetic shielding allows operation close to old-style CRT monitors, and there are inserts to accept an optional omni-mount mounting bracket.

The sealed-box-design subwoofer uses an 8" speaker with a cast-aluminum frame and a 1.5" voice coil. This is mounted in a forward-firing position behind a cloth grille, driven in mono by its dedicated 90W amplifier. The specified frequency response of the sub is 35Hz to 140Hz, 6 dB although the tests were done in anechoic conditions, which extends the response in a typical room down closer to 20Hz. Despite this, the sub is fairly dainty, measuring 330mm x 350mm x 330mm and weighing in at 11.4kg. As with the satellite speakers, the predominant material used in construction is MDF. Four removable spiked feet anchor the box to the floor.

The whole system is controlled from the hub, which links to the sub via a captive mini-DIN cable. Here you'll find the physical connections for the input formats described earlier, as well as the phones output. All the inputs are always active and are effectively mixed, which means you can monitor up to 3 simultaneous sources if you wish. Usefully, the subwoofer level can be independently adjusted from the hub rather than on the sub itself. This arrangement works well, though it would have been more sensible to make the sub adjustment a screwdriver preset (or to feature some other protective mechanism), to prevent it from getting moved accidentally.

Single 6" high resolution studio reference monitor speaker

Review: It was through Mackie's innovation and commitment to great sound, that Mackie managed to redefine the studio monitor. With high ingenuity at work, Mackie have reinvented their HR series to bring you the new HR624mk2 high resolution active studio reference monitor.

The HR624mk2 delivers better sound quality in a stunning new package. The precisely engineered contours of the cast aluminum Zero Edge Baffle minimize diffraction for a crystal clear image of your mix and control sound waves so you get detailed lows, full and articulate mids as well as shimmering highs whether you're on axis or off. Working in concert with the baffle's contours, the unique passive radiator design delivers astonishing bass extension that''s super-tight and always distortion-free. Wide, even dispersion of all frequencies as well as incredible depth of field allow you to accurately hear your mix, transforming your studio's sweet spot into a full-on sweet zone. In addition, the high-gloss piano black wood cabinet not only looks hot, but also adds just enough warmth so your sound is true, not sterile.

The Mackie HR624mk2 was created with high definition audio in mind with such unbelievable sound quality, there's little wonder why the HR624mk2 was approved for THX pm3 compliance on its initial trial. THX pm3 certification means that the HR624mk2 has met the stringent standards set by THX for outstanding performance and that this monitor can be used with confidence by anyone seeking THX certification for their studio or striving to maintain THX standards.

The Mackie HR624mk2 delivers superior performance and design, making itself a truly pro monitoring solution for today's studio.

Single 2-way nearfield active studio monitor

Review: The Sonodyne SM 50Ak studio monitor is ideal for not only desktop editing but also serious audio monitoring. It provides a well articulated yet full bodied response from its compact enclosure. The highs are open, the mids well resolved and the bass detailed and tight.

The Sonodyne SM 50Ak monitor is magnetically shielded and can be placed beside video monitors without interference. It has the facility for both console and wall mounting.

6" bi-amplified 2-way monitor speaker

Review: Drawing upon the design characteristics of our Expose E8B, the new VXT Series of monitors consists of three models, the VXT4, VXT6, and VXT8. With a visually striking enclosure design that is equally functional, providing low resonance, improved structural integrity and extended low-end, slotted ports for reduced port turbulence, plus a sleek curvature that provides excellent imaging characteristics and a widersweet spot the VXT monitors achieve a new level of precision.

The domed tweeter (comprised of true silk for fast transient response) and the new woofer design (with its stiffer, lighter cone that provides low distortion and extended low-end) both have vented formers to remove heat and reduce the effects of power compression, enabling these monitors to maintain their sonic signature.

With uncompromising attention to detail that includes tamper resistant switch covers, integrated Omni Mount support and more, the VXT Series is an outstanding choice for a broad range of monitoring applications.

http://www.youtube.com/watch?feature=player_embedded&v=j84Z4wkJQIg

Review: Samson's Resolv SE8 2-Way Active Studio Reference Monitor offers a redesign from the classic Resolv A-Series monitor, with more accurate sound reproduction and a stylish new look. Resolv SE8 utilizes the latest innovations in speaker engineering, which can be used with multiple monitors to provide superb stereo imaging for recording, post-production and other multimedia applications.

Producing 100W of power, the Resolv SE8 includes a dedicated power amp and electronic crossover that provide accurate tonal balance. The new 8" woven carbon fiber woofer provides tight and controlled low frequency response, while its 1.25" soft dome tweeter gives the high frequencies a true, natural sound without unwanted resonance. The Resolv SE8 also includes a 4-position high frequency lift control that allows the monitor to be optimized for different mixing environments, and is AV shielded for operation near computers.

Constructed of solid MDF (Medium Density Fiberboard), the new-look enclosure features an elegant finish on the front panel. Inset into the panel is a sleek, time-aligned waveguide for a wide listening area, allowing minimum diffraction. In addition, its slotted front ports with rounded inner edges help reduce port noise at high SPLs.

A pair of Resolv SE8s is the perfect monitor setup for any recording studio. Tracking vocals, instruments and sound design elements are a breeze with these pro-level monitors, as you'll be able to hear every nuance with impeccable precision and make adjustments for the best possible performance. In the end, the Resolv SE8s will help you get the sound you want from the start and save you valuable time in post-production.

When you're finished recording, the audio reproduction capabilities of a Resolv SE8 monitor system enables you to mix and master tracks that will sound great on a wide range of playback systems. Designed to help you producing smooth, even mixes, each Resolv SE8 features a wide frequency response, well-balanced speaker and control for optimizing the system for different mixing environments. The results will always be a solid representation what your song will sound like on record.

With the Resolv SE8s, you'll bring the experience of playing back your audio projects to a whole new level. Whether you're listening back to music recordings or viewing multimedia productions, the audio will sound crystal clear and full of dynamics when pumped through these monitors. And above all, a Resolv SE8 monitor setup gives you the playback accuracy you need to experience all your recordings exactly the way they were designed.

With a stylish elegance and precise engineering, Samson's Resolv SE8 active studio reference monitor will produce audio playback with sparkling clarity and definition to complement any recording space.

Active compact 2-way active monitor speaker with new power management technology

Review: The 8020C PM is a variation of the previous 8020B model, now incorporating power management technology which enables the speaker to run on a low power setting when not in use.

The small Genelec 8020B has been designed for monitoring in difficult listening environments, particularly those compromised by lack of space.

However, size is no handicap to performance as the 8020B two-way active monitoring system incorporates Genelec's acoustic design innovations to minimise all forms of distortion.

The 8020B has a die-cast aluminium Minimum Diffraction Enclosure (MDE), which features relatively large internal volumes; softly curved edges and outstanding mechanical strength.

As a result, the imaging accuracy and low frequency extension with such a compact enclosure are truly astounding.

Pair of professional 2-way active DJ & producer reference monitor speakers

Review: Reloop are proud to present the Wave Monitoring Statio, a practical monitoring powerhouse for every DJ and producer's setup.

The active reference monitor speakers are in a class of their own due to their precise playback and powerful rich output. The innovative design makes them ideal for DJs monitoring live in the mix, and thanks to the linear frequency-response curve, producers will also appreciate the Reloop Waves series as reference monitor speakers for studio applications. With a total of three different inputs (XLR, 6.3mm jack, and RCA) the flexibility on offer is unparalleled as different sources can be directly connected and monitored, eradicating annoying re-wiring or searching for switches in your cable set up. But what really defines these speakers as the ultimate monitoring station is the External Wave Controller. By accessing this solid control unit, it's simple to command both speakers from the comfort of your desktop (connected via a link cable). With the extra large aluminum knob, the volume can be adjusted effortlessly, and via the Input Selector, it's possible to quickly toggle between the 3 different inputs options (each clearly indicated by a glistening white LED on the front). A further switch can be used to set the station on stand-by, and with a push of a button, the output can be muted (LEDs will be dimmed depending on the status selected). Thanks to the variable EQ and frequency band adjustments, the Wave series can be instantly adapted to almost any room or situation without the need for a sub mixer. The smart tweeter construction has an especially wide audio beam in order to deliver outstanding sound to the listener from various positions, and strong magnetic drivers create the powerful rich sound demanded by the discerning DJs and producers of today.

It's important to stress that while the speakers were in development, Reloop strived for the highest quality components, fine-tuning, and sophisticated design. The result clearly speaks for itself. Aesthetics, versatility and performance are all masterfully combined in this exciting new desktop monitoring station. Welcome to Reloop Wave.

http://www.youtube.com/watch?v=0rHcF073bVU

165W 8" bi-amplified 2-way monitor

Review: The LSR2328P bi-amplified 2-way model is based on an 8" (203mm) long excursion woofer and a 1" (25mm) soft dome tweeter. It includes balanced XLR, balanced 1/4" TRS, and RCA unbalanced input connectors to allow connection of professional mixing consoles, computer audio interfaces, audio visual equipment, and consumer audio systems. A detented level control allows fine adjustment of individual speaker levels to balance each speaker in the system. Low frequency and high frequency trim controls let you tailor the speaker's response to preference or room acoustics. A neoprene rubber pad on the bottom of the speaker provides acoustic isolation and increases stability when the speaker is placed on a speaker stand or a console top. Mounting points are included and the enclosure has been reinforced for safe mounting using industry-standard mounting hardware.

Compact 2-way active monitor with magnetic shielding

Review: The small Genelec 8020B (height with Iso-Pod 242mm, width 151mm and depth 142mm) has been designed for monitoring in difficult listening environments, particularly those compromised by lack of space.

The 8020B has a die-cast aluminium Minimum Diffraction Enclosure (MDE), which features relatively large internal volumes; softly curved edges and outstanding mechanical strength. As a result, the imaging accuracy and low frequency extension with such a compact enclosure are truly astounding.

The 8020B also incorporates the advanced Directivity Control Waveguide (DCW), which provides an amazingly smooth on and off axis response; while the long, curved reflex port ends in a wide flare for excellent bass articulation.

Each monitor features a 105mm (4") bass driver along with a 19mm (3/4") tweeter loaded into a new advanced Genelec Directivity Controlled Waveguide (DCW). The free field frequency response is 66Hz to 20 kHz (2.5 dB). Maximum peak SPL output per pair with music material is 105 dB at 1m. Bass and treble are each powered by 20W amplifiers.

The 8020B can be combined with the new 7050B Laminar Spiral Enclosure (LSE) subwoofer to provide a powerful, bass-managed and wide bandwidth surround sound monitoring system.

Review: The uniK 05 monitor is the result of extensive development work done in Germany, to provide a professional active reference monitor that defines a new level of quality in this class.

The monitor features a new 5" Kevlar low frequency driver and a custom engineered and powerful high frequency ribbon tweeter with an extraordinary light membrane. This provides a very clear, strong and precise sound image especially in the high frequencies. With less moving mass compared to conventional tweeters, a new level of impulse response with minimized distortion is achieved. The optimized matching mechanical design of the uniK 05 cabinet provides a special and truly unique sound characteristic that makes this monitor an important part of your studio setup instantly.

Review: The ADAM F5 is the entry level version of the new ADAM F series studio monitors, designed for smaller listening environments, but despite its size is still capable of delivering deep and tight low frequencies.

The F5 features a redesigned version of ADAM's acclaimed ART ribbon tweeter to reproduce high frequencies with the airiness, clarity, and detail ADAM is famous for. ART tweeters have a high efficiency (approximately 92 dB/W/m), a perfectly linear impedance, an equally perfect phase response, excellent directivity characteristics and a superb power handling capacity.

The 5" woofer is made from carbon and paper and has a 25mm voice coil, designed to seamlessly integrate with the tweeter's performance. Several controls on the rear panel let you adjust the Adam F5 monitor to the listening environment, these include 2 room EQs for both the high (>5 kHz) and the low (<300Hz) frequencies, as well as a dedicated volume knob.

The Adam F5 brings you the essence of Adam speakers at a new, lower price point.

www.youtube.com/watch?v=mjthIjRVwtE

Review: The KRK RokitG2 Series takes value-priced monitors to a new performance level. All of the great stuff that Rokit's have been known for (front-firing bass port, soft-domed tweeter, glass aramid composite yellow cone) are still there, but the G2 Rokit's feature refined voicing and a new curved baffle that looks great, reduces diffraction and provides even better monitoring accuracy.

Studio Monitor Series from KRK Systems. For years the Rokit series has been a popular choice for accurate monitoring in studios large and small. Now the all new Generation 2 RoKit provides a new standard for even better performance and accuracy, raising the bar once again.

Pair of high-resolution, active 2-way reference studio monitors

Review: The Behringer TRUTH B2031A monitors are powerful, active 2-way reference studio monitor that deliver very neutral sound with an extremely flat frequency response.

The Behringer TRUTH B2031As come with XLR and 1/4" jack TRS servo balanced inputs that delivers very neutral sound and has an extremely flat frequency response (50Hz - 21 kHz). The B2031A includes built-in 150W and 75W power amps with enormous power reserve plus separately controlled limiters for low and high frequency overload protection. Tight, deep bass is provided by a long-throw 8 3/4" woofer with a special polypropylene diaphragm, while a ferrofluid-cooled HF driver guarantees clear and detailed highs.

The TRUTH B2031As also feature the unique Behringer wave guide and the extremely low-distortion active crossover network with 4th order Linkwitz-Riley filters, producing an absolutely linear phase response with excellent sound dispersion and stereo imaging together with an extremely large sweet spot. The B2031A monitors are adjustable to a wide range of acoustic conditions or subwoofer combinations and magnetic shielding allows placement near computer/video monitors.

www.youtube.com/watch?v=b98X2jjWpNs