Kenton At Juno Download

Review: This converter has 16 GPI inputs (general purpose interface) arranged on 2 x 9 pin D sockets. It can output MIDI messages as notes, controllers (CCs) or program changes. The references to MIDI note numbers also applies to controller numbers or program numbers if that is the output mode currently in use.

Bi-directional MIDI-DCB interface, including 14 pin DCB lead

Review: The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8 (must have an existing DCB 14 pin). Just plug in and go.

As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.

2 x 3.5mm mono jack to 1/4" mono jack leads for Clock and VCF are included as well as the selected DCB lead.

USB powered high specification single synth USB MIDI to CV converter

Review: This is Kenton's USB version of their popular Solo MIDI to CV converter, so you need one less interface when connecting your analog synths to MIDI.

High specification single synth MIDI to CV converter

Review: The Pro-Solo is designed to control one monosynth and features a single CV & Gate output, fully programmable auxiliary CV output and 1 LFO. Editing is easy with its LED display and non-volatile setup memory. The Kenton Pro Solo MkII can also be used as a Sync 24 and arpeggio clock converter.

Review: Mainly intended as a MIDI volume level indicator where high visibility is needed, the LD2 displays the level both numerically 0 - 127, and on a 20 segment bargraph.

The LD2 isn't restricted to displaying volume only however, it can easily be re-configured to display the data value sent by any controller on any MIDI channel. Factory default is controller #7 (MIDI volume) on MIDI channel #1.

Host for class compliant USB MIDI devices

Review: Your USB device is plugged into the USB MIDI Host instead of into a computer. It provides MIDI input & output sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI input and a MIDI output (both 5 pin DIN). The MIDI data received at the MIDI input socket will be sent to the USB device. MIDI data received from the USB device will be sent to the MIDI output socket.

Look for a generic driver setting, your device must be class compliant. Some devices (notably Roland devices) have a setting for an advanced driver, if your device has this setting, turn it off. Most Edirol products have this setting on by default and can be made to work by changing it (refer to the manual). And also, you need check for firmware updates. Some Novation controllers/keyboards can have their firmware (software) updated and will work with the new version. This may only apply to the Remote Audio, LE or SL series, and not the 25/37 models.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied) and can supply up to 500mA of buss power to the attached USB device.

Merge MIDI box with 4 inputs/2 outputs

Review: The Kenton Merge 4 can merge the data from up to 4 separate MIDI sources (e.g. Master keyboards or controllers) into a single MIDI data stream which appears at both of the MIDI out sockets. It features 4 opto-isolated MIDI inputs and 2 MIDI outputs.

The Kenton Merge 4 is powered from a mains adaptor (wall wart) so you can fit and forget.

Thru box with 1 MIDI input to 5 MIDI thru. mains adaptor included

Review: The Kenton Thru-5 is a high quality MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. It is powered from a mains adaptor (wall wart) so you can fit and forget.

Wasp cable 15 pin high density D plug to 7 pin DIN plug

Review: The Kenton Wasp Cable is used for connecting the KADI port of a Pro-KADI, Pro-2000 or Pro-4 to a Wasp or Gnat synthesiser.

Review: The standard Cat5E cable is used with the Kenton LNDR MIDI line driver, allowing MIDI to be sent out accurately.

Review: The standard Cat5E cable is used with the Kenton LNDR MIDI line driver, allowing MIDI to be sent out accurately.

Review: This Kenton lead connects Kenton converters to equipment that uses a 2 pin Cinch Jones connector for the s-trig input, mostly Moog (Minimoog for example).

9V 550mA unregulated PSU centre positive 2.1mm EU

Review: Plug-top type power supply (wall wart).

Output: 9V 550mA unregulated - centre positive 2.1mm DC plug
Input: 230V 50Hz with European style 2 pin power plug.

Review: This Kenton lead connects Kenton converters to equipment that uses a 2 pin Cinch Jones connector for the s-trig input, mostly Moog (Minimoog for example).

Review: This Kenton cable connects Kenton converters to other equipment which need this type of connection. It is used on some Moogs (Rogue & Source for example).

9V 550mA unregulated PSU centre positive 2.1mm UK

Review: Plug-top type power supply (wall wart)

Output: 9V 550mA unregulated, centre positive 2.1mm DC plug.
Input: 230V AC 50Hz with UK 13 amp 3 pin power plug.

9V 550mA unregulated PSU centre positive 2.1mm US

Review: Plug-top type power supply (wall wart).

Output: 9 volts 550mA unregulated - centre positive 2.1mm DC plug.
Input: 110 to 120 volts 60Hz with U.S. style 2 pin power plug.

Review: This Kenton cable connects Kenton converters to other equipment which need this type of connection. It is used on some Moogs (Rogue & Source for example).

Review: The Kenton instrument lead comes with professional low-noise cable and high quality connectors. All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Review: This Kenton cable connects Kenton converters to other equipment which need this type of connection. It is used on some Moogs (Rogue & Source for example).

Review: All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Review: The Kenton 3.5mm Jack To 1/4" Jack Lead Mono connects Kenton converters to other equipment which use 6.35mm (1/4") mono jacks.

Review: All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Review: The Kenton 3.5mm jack lead is a 5m unbalanced audio cable with good quality 3.5mm jack (TS) connectors. This cable is ideal for use in any audio applications.

Review: The Kenton 3.5mm Jack To 1/4" Jack Mono lead connects Kenton converters to other equipment which use 6.35mm (1/4") mono jacks.

Review: All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Review: All MIDI leads are made with twisted pair screened cable (as MIDI spec).

Review: The Kenton 3.5mm Jack To 1/4" Jack Lead Mono connects Kenton converters to other equipment which use 6.35mm (1/4") mono jacks.

Review: The Kenton 3.5mm jack lead is a 2.5m unbalanced audio cable with good quality 3.5mm jack (TS) connectors. This cable is ideal for use in any audio applications.

Review: The Kenton coupler is used to connect 2 CAT cables.

Review: The Kenton 3.5mm jack lead is a 1.2m unbalanced audio cable with good quality 3.5mm jack (TS) connectors. This cable is ideal for use in any audio applications.